Aqua Mix Seal & Finish Low Sheen Durable Coating Sealer 1 Gallon

Aqua Mix Seal & Finish Low Sheen is a specially formulated water-based blend of acrylic polymers that provides both a stain resistant surface seal and a durable low-sheen finish eliminating conventional two-step methods. Aqua Mix Seal and Finish Low Gloss may be used as a pre-grouting sealer over clean tile surfaces a minimum of 2 hours prior to grouting. Aqua Mix Seal & Finish Low Sheen allows moisture vapor transmission and is not affected by ultr-violet light. Aqua Mix Seal & Finish Low Sheen is recommended for use on porous surfaces such as saltillo, terra cotta, adobe, slate, flagstone, sandstone, and quarry tile. Aqua Mix Seal and finish Low Sheen is equally effective for interior and exterior applications. Aqua Mix Seal & Finish Low Sheen expected wear is up to 3 years depending on hardness and texture of surface, type of area, surface wear, frequency and type of maintenace products used. High-alkaline or solvent-based cleaners will affect wear. Coverage: Approximately 300 to 1000 sq. ft. per coat per gallon depending on porosity and texture of surface.

• Aqua Mix Seal and Finish Low Sheen provides an attractive yet durable low-sheen finish
• 2-in-1 product is formulated from a water-based blend of acrylic polymers
• Protects against stains and ultra-violet light for up to 3 years
• Offers beautiful results for both interior and exterior applications
• Ideal for slate, quarry, saltillo, sandstone, terra cotta, cement pavers, and masonry